Manual Version 4.026 07.01.2018

Manual IN WIKI

How To Update:

UPDATE-Manual


Update: 14. May 2019

Version 4.108/4.108V2 DOWNLOAD

- Bugfix N14 / N20

Update: 13. May 2019

 4.107 / 4.108
 - add N14 Mini
 - Fix Color issue if "save last page" is enabled
 - Visu fixes
 - Add start option to set exhaust flap always to open/close/auto (press on text for exhaust flap activation)
 - BUGFIX: F-Series, no longer need to turn ignition off and lock the car once the display is locked to unlock the OBD2 Port
 - Prepared PWG / EWG Settings (Systemsetting) for N55 F-Series - Need more tests


Update: 26/27. April 2019

Version 4.106V2  DOWNLOAD

 4.106 V2
- Fix M47 DPF Values
- Fix "BetterFonts" 3.2 Inch Display
---------------------------------------------------------

4.106
 - Fix "Best Times"
 - Add warning to factory reset
 - Add CPU load and free RAM at info Page
 - Calculations at some pressure values now without ambient pressure
 - Split program to different language locations - choose correct language pack during Update
 - Change global settings color setup. Optional change Headlines, Texts, Values and Units color.
 - S55 add fuel "low-pressure" signal
 - S55 add oillevel in mm
 - Add fix custom NTC temperature sensor values (no reboot required if less digits as value before)
 - Some visu changes (button styles)
 - Limits: Railpressure limit now up to 2000 bar
 - Add external NTC temperatur sensor for F-Series which have stock oilpressure (i.e. Rear-Diff Sensor)
 - Add color control for external temperature sensor (color setup last page)
 - OPF Delete-R preparation (Need error informations from customers to test)
 - Add N57 F-Series Engine
 - Change exhaust flap "timer" to prevent "flicker" exhaust flap in cold-start (F-Series)
 - Fix external Oiltemperatur Sensor for N57 E-Series
 - S55 Fuelpump ON/OFF (needed for VLN Race Cars)
 - fix save option for external exhaust temperature sensor
 - Add Water- and Oiltepmerature to Custom Dashbar
 - Add 3.2" and 3.5" NBT Style with nicer fonts (only as TFT file - no edit possible, manual for uploading in "Wiki")


BETA VERSION: Update: 22. Jan 2019

Version 4.105  DOWNLOAD

 - Fix Font-Bug 7digit small Font
 - Fix Font-Bug Safe-Mode
 - Removed Italian language (if needed contact us)
 - Fix Relay save last state if manually switched on
 - Save Water- and Oiltemperature max values
 - add option for external boost pressure sensor (S65 engine only - Settings/Special/Page2)
 - Show height difference at time measurements (if GPS Signal is supported)
 - Option Oilpressure instead of Exhausttemperature at Page 1 (press on icon to switch)
 - Add M57/T Engine (old 2004 diesel) to option (Settings - System - Page2)
 - Add new Max Page: Shows best times "ever". 0-100, 0-200, custom speed, 1/4 mile, 1/8 mile, 1/2 mile
 
 - reorganisation of max values
        Max 1:
        1 Torque            4 Watertemp
        2 Power             5 Oiltemp
        2.1 (torque)        6 Speed
        2.2 (rpm)
        Max 2:
        1 RPM               4 G-Kraft (Längs,Quer)
        2 Boost Actual      5 Boost Target
        3 Airmass           6 IAT
        Max 3:
        1 Time 0-100        4 1/4 Mile
        2 Time 100-200      5 1/8 Mile
        3 Time custom       6 1/2 Mile


Update: 28. November 2018

Version 4.104 V7  DOWNLOAD

28.Nov.2018

Update V7:

- New Controller AK01E support. The new Controller will ONLY work with THIS VERSION.

All older controller will also work with this version.

Update: 02. November 2018

Version 4.104 V6  DOWNLOAD

02.Nov.2018

Update V6:

- Fix N13/N20 F-Series Exhaust Flap Control

Update V5:

- Fix N20 F-Series
- Fix Save Relay-Status
- Difference pressure (for some diesel DPF values) without ambient pressure

22.Sept.2018

Update V4:

- Fix change bargraph switch at power-page (was switching to time measurements page)

Update V3:

- Fix external Oiltemperature Sensor active even in safe-mode

Update V2:

- Fix custom oiltemperatur sensor remanent saving of values

- FIX OBD2 BLOCKER !!! Was "Thief Protection" now back to complete block of all Diagnose Signals.
- Save last relay state
- Pageupdate "Info-Status": E-SERIES N54 Test (Oillevel in mm, Oil-permittivität and battery condition in %)
- Prepare exhaust-flap variable to use in different pages (will be described at Wiki Workshop)
- Fix some imperial (not metric) values
- Add S63 Engine E-Series
- F-Series RES-Button delay 750ms to prevent switching Exhaust-Flap all the time
- Update Visu Pages (some fixes, some code-size cuts)

To be tested:
- TEST Gearbox-Temperature for F-Series manual shift
- TEST Shifttime even for Automatic and DKG Gearbox (at time measurements)
- TEST Speed-Offset "Set" Button for 100 and 200
- TEST Press Speed Icon at Temperatures Page for changing between Speed/Oilpressure/Rear-Diff-Temp
- TEST Add Custom Oiltemperatur Sensor Setup (press on Text in Settings to open Setup)


PUPLIC BETA VERSION:

Update: 21.Juli 2018

Version 4.101  DOWNLOAD

4.101 BETA
- Switch between Speed - Oilpressure - Reardiff (press on icon to switch it)
- Test MFL (Limiter "Reset-Button" F-Series)
- Speed Offset Button "SET"
- Add Big Single Value Option at custom page (now 4 subpages - press big single value to change it)
- Logging cycletime (Settings - System)
- B58 new I-Stufe implementation complete (Settings - System - Page2)


Update: 07.Juli 2018

Version 4.100   DOWNLOAD

- Version change to 4.1XX
- Fix Time-Measurement issue (no time counting)
- smoothness of manifold pressure sensors
- New B58 ECU-Software implemented (to be done)
- First test of logging function


Update: 30.April 2018

Update 4.032 V2

IMPORTANT: Fix: Freeze when First start setup takes longer than 15 seconds !!!

- M54 Engine added

Version 4.032 V2   DOWNLOAD

- 1/X Mile abort when Speed is 0 again
- Fix: Delay Time / Freeze at time-measurement
- delete JB4 Versions (F-Series) - will be extra Version
- Fix: switched Values Oilpressure + Railpressure N55 E-Series
- Add Oiltemperature to N57 Diesel E-Series without external sensor
- Change: Limits now show "Warning" Picture and can be combined with relay extension board
- small visu changes
- Add manifold (exhaust) pressure sensor option (features)


WARNING: Known Error: Torque and power are not showing values on the second page "Vehicle Status". Will be fixed quickly!

Version 4.031 V2  DOWNLOAD

- Fix Engine M47
- Fix "Boost" to "Airmass" if no Turbo-Engine (To be tested and confirmed)
- Test M-Instrumentcluster in not M-Vehicle (working shiftlight at rpm gauge) // To be continued
- Fix Torque value if Offset is < 1.0
- Fix Torque value show negative
- Fix S55 (F-Series N55?) Exhaust Flap delay
- Fix OBD2 Blocker (known in 4.030)
- Fix Units naming
- Some Visu improvements


Version 4.029 DOWNLOAD

- NBT Style for testing

- MFL Buttons (Steering Wheel) for switching Exhaust Flap and Soundtuning (F-Serie) - (Settings --> Global -> scroll down -> MFL Setup)

First delete button, then choose your button.

Important:

There is a small Bug reading the VIN from the car.

If there is a problem with the activation please send us your VIN (last 7 digits) and the HW-ID number, which is written at the Info-Page (Info-Icon at Mainmenu). We will send back the new activationcode which will work even you put the display into another car.


Update: 29.01.2018

Version 4.027 DOWNLOAD

Update: 06.01.2018

Version 4.026 

Update: 29.12.2017

Version 4.024